Site Information

 Loading... Please wait...
  • Image 1
  • Image 2

900mAh GS PT-S01 USB Passthrough eGo Battery


Product Description

900mAh GS PT-S01 USB eGo/Evod passthrough battery.

Plug it in to a USB port with a micro USB cable to charge and/ or use simultaneously (1.5m USB cable is an optional extra).

Now with battery capacity indicator to show charge remaining.

Blue Light: 100-40%
Red Light: 40-1%
Red flashing: 0% power

The eGo-T batteries come with a switch-off mechanism in order for you to carry it in your pocket or bag, without risk of it being accidentally activated.

5-click switch off/on mechanism: Click the button rapidly 5-times to set the battery to ON mode, or OFF mode (the battery generally comes switched OFF).

The eGo-T batteries work with all eGo/510 atomisers and cartomisers.

Micro USB cable for charging NOT included.

Micro USB cable can be added as an optional extra.

To charge, plug the USB cable in the bottom. The other end of the cable you plug into a USB port.
It lights up red on the bottom when charging, and goes out when charged.
You can also use the device while the battery is charging.
They can also be charged using a standard eGo charger.

The battery comes with 28 days warranty.


NOTE: Battery Safety

Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled.

Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Always charge in/ on a fire-proof surface.

Never leave batteries charging unattended or overnight.

Do not charge on carpets, couches, near curtains or other flammable items.

Please be sure to use the correct specification charger with the correct device/ battery.
Failure to use the correct specification charger could result in damaging the battery and/or explosion or fire.


The output specification of the USB charger required should be no higher than that specified for the type of batteries below:
Output of charger required for 510 (small battery): DC 4.5v - 0.15A
Output of charger required for E-Smart battery: DC 4.2V - 200mA
Output of charger required for eGo / Evod battery: DC 4.2v - 420mA

Just because a battery can be screwed into a certain type of charger does NOT necessarily mean it is the correct charger for the device!

Never continue to use an e-cigarette if you can feel the battery get hot. If your battery gets hot to the touch, orif it begins smelling: DO NOT USE IT ANYMORE. Let it cool down (1 hour) in a safe environment (outside preferably), and dispose of correctly, or make arrangements to return, if still under warranty.

If your e-cigarette or device begins activating itself, immediately remove your atomiser and disconnect the battery. Do NOT trust the battery, nor the atomiser anymore from this point on. This means never leave either of the components connected in your pocket, in your nightstand, or out of visibility where you can not immediately separate the two components.

Read the information found at: Battery University before purchasing. It is important to carry batteries properly, charge properly, and dispose of properly.

iVapour Limited are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the use of any batteries.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the 900mAh GS PT-S01 USB Passthrough eGo Battery to your wish list.