Skip to main content
Innokin CoolFire Z50 Kit with Zlide Tank

Innokin CoolFire Z50 Kit with Zlide Tank

Innokin

£51.95
(No reviews yet) Write a Review

Innokin CoolFire Z50 Kit with Zlide Tank

The latest of the internationally bestselling line of Innokin Cool Fire mods, the CoolFire Z50 mod paired with the Zlide tank is smart and compact, but still with large 2100mAh battery capacity.
 
The Zlide tank is easy push-slide top-filling, quick coil change, with great flavour and plenty of vapour.
 
  • Adjustable 6 – 50 Watt Vaporizer  
  • Easy to Use with great buttons and bright OLED screen.
  • Amazing flavors with the Zlide tank and entire range of Z-Coils.
  • High Quality 510 connection for 22mm/24mm Tanks.
  • Compact 2100mAh internal battery.
  • 1 Amp micro USB charge with safety protections.
1A USB wall plug for faster charging can be added as an optional extra.

For shipping outside the UK, a tracked shipping option must be selected to complete transaction.

innokin-logo-new.jpg

CoolFire Z50 Device Specs

  • Size: 69 x 34 x 26mm
  • Battery Capacity: 2100mAh / 3.7V / 7.77Wh
  • Screen: OLED 0.69"
  • Wattage Range: 6-50W
  • Voltage Range: 3.0 - 7.5V
  • Cut-Off Time: 15 Seconds
  • Max Output: 20A
  • Resistance Range: 0.2 - 3.5 ohm
  • Body Material: Zinc Alloy
  • Thread: 510
  • Charging Current: 1.0A

Zlide tank Features

  • 22mm diameter
  • Slide-to-fill top cap 
  • Mess-free head swapping
  • 510 connection for cross compatibility

Kit Contents

  • 1 x CoolFire Z50 device
  • 1 x Zlide tank
  • 1 x 1.2Ω Z-coil head (installed)
  • 1 x 0.8Ω coil head (spare)
  • 1 x spare drip tip
  • 1 x spare glass tube
  • 1 x spare o-rings pack
  • 1 x Micro USB charging cable
  • 1 x Quick start guide

Approximate Dimensions
Adept Device: 69mm x 34mm x 26mm
Zlide tank: 34mm x 22mm

Some tips for the Zlide tank:

To remove the coil, unscrew the the base, and the coil head just pulls out.
Prime the coil with 3-4 drops direct to the top of the coil.
To put the coil back in, the flat edges of where it goes in have to line up with the flat edges of the coil head so it fits in nice and flush.
Screw the base back on to hold the coil in place.
(If there is a gap between the base of the tank and the body, the coil head has not been put in correctly).
To fill, pull the mouthpiece out, and push to slide open where the red arrow is.
The mouthpiece that comes with it has a little locking nipple on the bottom end, so that the mouthpiece has to be pulled out when filling.
If you don’t want to pull the mouthpiece out every time you fill, the spare mouthpiece doesn’t have the little locking nipple on it.
With a new coil, leave the coil to soak in for a couple on minutes before you fire it up.
 
The CoolFire Z50 mod comes with 3 months warranty.

battery-stamps.png

NOTE: Battery Safety

Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled.

Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Always charge in/on a fire-proof surface.

Never leave charging batteries unattended.

Never continue to use an e-cigarette if you can feel the battery get hot. If your battery gets hot to the touch, orif it begins smelling: DO NOT USE IT ANYMORE. Let it cool down (1 hour) in a safe environment (outside preferably), and dispose of correctly, or make arrangements to return, if still under warranty.

If your e-cigarette or device begins activating itself, immediately remove your atomiser and disconnect the battery. Do NOT trust the battery, nor the atomiser anymore from this point on. This means never leave either of the components connected in your pocket, in your nightstand, or out of visibility where you can not immediately separate the two components.

Read the information found at: Battery University before purchasing. It is important to carry batteries properly, charge properly, and dispose of properly.

iVapour Limited are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the use of any batteries.

!