Skip to main content

Innokin CoolFire Z80 Kit

GeekVape

£57.95
(No reviews yet) Write a Review

Innokin | CoolFire Z80 Kit | 80W | Single 18650 | 2ml Zenith II / 2 Tank

The Innokin Z80 & Zenith II - Combined Excellence

Fourier Tech Inside - The 4th Gen Vaping Technology

The primary mode on the interface, FØ, extends coil life and boosts flavours using an alternating current (ACM) to produce a waveform that runs continuously while you vape. This is made possible by sending an electrical output in two directions across the coil in a much more precise and efficient way.

FØ Mode recommended frequencies:

  • MTL: 51-100hz
  • RDL/DTL: 20-50hz

Refresh Mode

Activate refresh whenever you want to improve wicking, revitalise flavours and extend coil life. Refresh powers the coil at 40% of your set wattage, with alternating current, drawing in more liquid into the coil.

The New Zenith II - The King is Back

The tank that changed the MTL scene is back and better than ever. From a silent, tight and smooth MTL draw to an outstanding RDL vape, upgrade your experience with precise airflow!

Fill effortlessly with an upgraded revolving cap. We've also added a silicone seal on the fill port for mess-free refilling.

Full Z-Coil Compatibility

Z-Coils are designed in collaboration with Phil Busardo and Dimitris Agrafiotis as part of the Platform Series. World renowned for their performance in flavour and quality, Z-Coils offer a range of choices to suit your personal preference. The Zenith II includes the MTL flavour maker 0.8 Ohm coil and the outstanding RDL 0.3 ohm coil.

Replaceable 18650 Battery

Twist the battery cap door and quickly replace the 18650 battery (not included/optional extra). The Coolfire Z80 features a USB-C charge port and the complete range of integrated safety protections.

Ultra Fast Ignition

The chip on the CoolFire Z80 delivers an instant 0.003s ignition speed with a power output of up to 80W, which gives you a much more customisable experience to achieve your perfect vape.

A Selection of Unique Textures

Unique textures similar to suede and leather are incredibly light and soft to the touch. The colours range from sharp black and white to a muted colour palette of greys. The frame of the Coolfire Z80 comes in 3 unique colours; Gunmetal Black, Dark Grey & Steel Silver.

Specification:

  • Device Dimensions: Without Tank - 83.55 x 38.3 x 27.6mm / With Tank - 131.75 x 38.3 x 27.6mm
  • Battery: External 18650 Battery
  • Wattage Range: 6-80W Adjustable
  • Voltage Range: 1.75V Adjustable
  • F0 Hz Range: 20-500hz
  • 3-18s Adjustable
  • Tank: Zenith II
  • Max Output Current: 28.5A
  • Resistance Range: 0.1 - 3.5 Ohm
  • Body Material: Zinc-Alloy
  • Thread Type: 510 Thread
  • Charging Current: 5V/1.7A

Kit Includes:

  • 1 x CoolFire Z80 Mod (Battery not included/optional extra)
  • 1 x Zenith II Tank (Z Coil 0.8 Ohm MTL Installed)
  • 1 x Spare Z Coil 0.3 Ohm RDL
  • 1 x Spare Zenith II Tank RDL Drip Tip
  • 1 x Spare O-Ring Set
  • 1 x Type-C USB Charging Cable
  • 1 x Quick Start Guide
Warranty

The mod comes with 3 months warranty, the tank comes with DOA warranty only.

For shipping outside the UK, a tracked shipping option must be selected to complete transaction.

Some tips for the Zenith tank:

To remove the coil, unscrew the the base, and the coil head just pulls out.
Prime the coil with 3-4 drops direct to the top of the coil.
To put the coil back in, the flat edges of where it goes in have to line up with the flat edges of the coil head so it fits in nice and flush.
Screw the base back on to hold the coil in place.
(If there is a gap between the base of the tank and the body, the coil head has not been put in correctly).
With a new coil, leave the coil to soak in for a couple on minutes before you fire it up.
 

battery-stamps.png

NOTE: Battery Safety

Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled.

Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Always charge in/on a fire-proof surface.

Never leave charging batteries unattended.

Never continue to use an e-cigarette if you can feel the battery get hot. If your battery gets hot to the touch, orif it begins smelling: DO NOT USE IT ANYMORE. Let it cool down (1 hour) in a safe environment (outside preferably), and dispose of correctly, or make arrangements to return, if still under warranty.

If your e-cigarette or device begins activating itself, immediately remove your atomiser and disconnect the battery. Do NOT trust the battery, nor the atomiser anymore from this point on. This means never leave either of the components connected in your pocket, in your nightstand, or out of visibility where you can not immediately separate the two components.

Read the information found at: Battery University before purchasing. It is important to carry batteries properly, charge properly, and dispose of properly.

iVapour Limited are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the use of any batteries.